M18 x 1.5 mm Left Hand Thread ULTRA HIGH PERFORMANCE / ULTRA HIGH STRENGTH Rod End Joint

Product Information

Product Information

McGill Motorsports Ltd    

Europes Lowest Cost , Specialist Suppliers of Racers Rose Joints , Spherical Bearings ,Threaded Inserts ,Clevis Joints and other Racers Hardware. 

 Credit Card Payment /Technical Support Hotline open every day from 9AM - 10 PM  

Telephone : 01592 654136    E Mail : mcgillmotorsport@aol.com 

At McGill Motorsports Limited , we pride ourselves on being Europe's lowest cost specialist suppliers of all types and grades of UNF and Metric Rose Joints (Rod Ends) ,Spherical Bearing and Clevis Joints ...check out our other items !!!

We specialise in the supply of quality Rose Joints/Rod ends and Spherical Bearings for most applications and carry the largest stock in Europe with over 250,000 Rose Joints/Rod Ends and Spherical Bearings in many grades and performance specifications in stock at any one time.

We import in massive quantities and deal direct with both trade and public as one - therefore being able to offer the highest quality motion transfer solutions at unbeatable prices....guaranteed !

We also have the very best technical support /customer service available with next day delivery of most orders and a credit card payment/technical support hotline open from 9AM to 10 PM ,7 Days a week - Tel UK (44) (0)1592 654136

M18 x 1.5 mm FINE PITCH THREAD MALE (LEFT HAND  THREAD) Ultra High Strength / Ultra High Performance Rose Joint /Rod End .

We have just introduced an exclusive brand new range of  the Ultimate Highest Performance /Highest Strength Metric Rose Joints available - just about anywhere.  

This item is a Ultra High Strength / Ultra High Performance Metric Rose Joint/Rod End and features a high strength Chrome Molybdenum Body ,Chrome plated hardened ball and PTFE/Kevlar high performance liner.

We detail the full performance specification below.

Remember , McGill Motorsports Ltd are cheaper than all others in Europe ....guaranteed  !!!  

 This Ultra High Strength /Ultra High performance range of Metric rose joints have been specifically introduced to remove the age old problem of  Metric sized rose joints having grossly inferior strength and performance to their American UNF counterparts.

 These precision rose joints offer far smoother operation and longer life and significantly higher strength than lower cost economy grade metal to metal 2 part rose joints or bronze race high performance types.

These are ideal for  general Motorsport and Motorcycle applications ....offered at the lowest price in Europe….guaranteed !!!

  These items feature the following specifications ,but do remember we have both Economy Grade versions and the Ultra High Performance Metric Rose Joint families also available in our shop from M6 to M22 as well as the very hard to find ,special fine thread Metric versions also.

 If you are looking to manufacture your own arms , links ,wishbones , ARB's ,Panhard Rods etc then we can save you a lot of time and money by offering a one stop  shop solution for the complete line of supporting accessories for almost all of the rose joints/rod ends we offer - such as  ;-  

·        Weld in threaded inserts /Bungs to accept our range of rose joints - all sized for popular tube sizes.  

·        High misalignment angle spacers /reducers.

·        Half lock nuts 

·        Pre-manufactured and plated turnbuckles (in many lengths from 70 mm up to 500 mm) 

·        Protective all in one rubber sealing boots - to protect your rose joints from wear due to ingress of contaminants.

McGill Motorsports aim to make life easier for the fabricator - with the aim of saving time and providing these high quality items at a cost much less than it would actually be to try and manufacture these items yourselves on a lathe - and all our items are protective coated after manufacture - to give that final professional look.

M18 X 1.5 mm Fine Thread Male Ultra High Strength /Ultra High performance Left Hand Rose Joint Materials Specification :-  

Spherical Bearing Inner Ball hole diameter :   (18 mm hole)

·        52100 Bearing Steel

·    

             Hard Chrome Plated

·        Heat Treated

·        Precision Ground

·     

  Outer Race

PTFE/Kevlar

-        Self Sealing

-        Self Lubricating (Maintenance free)  

Liner 

    Self Lubricating, PTFE/Teflon

Carrier Body (M18 x 1.5 mm fine pitch Left hand thread)

·         High Strength Chrome Molybdenum

·         Metal to Metal for heavy shock loads

·         Increased Cross Sectional thickness for massive tensile strength

Exclusive Features

·        Maintenance Free.

·     Self  Lubricating -  no grease nipple required.

·        The Ultimate Highest Strength  Metric Rose Joints available almost anywhere…compare our performance specifications below.

·        Ultra Smooth operation, float free balls in sockets and much longer life than other High performance rose joints or 2 part Economy rose joints !!

·         High Reliability

Radial Static Load Specification

·         A massive , massive 90 KN !!!!...ALMOST 4 TIMES THE STRENGTH OF CHEAP , ECONOMY GRADE TWO PART ROSE JOINTS SOLD ELSEWHERE FOR JUST A FEW PENNIES LESS OR ELSEWHERE FOR EVEN MORE MONEY !!!!

·        Misalignment Angle ; 13 degrees.

·        Perfect for most forms of Motorsports and Motorcycles..

               McGill Motorsports Limited 

 (UK) 44 (0)1592 654136  mcgillmotorsport@aol.com 

&n

Price: £16.50

• Tell a Friend